entry.ts

1import { setupMessageHandler, setRestoreReady } from "./messages";2import { setupAutoLock } from "./alarms";3import { setupSyncAlarm } from "./sync-alarm";4import { setupPasskeyProxy } from "./passkey";5import { setupCommands } from "./commands";6import { setupClipboardClearAlarm } from "./clipboard";7import { applyStorageHardening, restoreFromSession, isUnlocked, lock } from "./vault";8import { ensureSettingsLoaded } from "./vault";9import { isRecoveryConfirmPending } from "./recovery-pending";10import { denyAllPendingPasskeyRequests } from "./passkey";11import {12  hydratePersistedSyncState,13  setSyncDialTargetSelector,14  setSyncRunner,15  triggerSyncIfReachable,16} from "./sync-trigger";17import { productionSyncRunner } from "./sync-runner";18import {19  drainAndRefreshLockedSyncSpool,20  refreshLockedSyncSpool,21} from "./sync-vault-adapter";22import { setLockedSyncHooks } from "./vault";23import { repairPairedRevocationOverlaps } from "./paired-devices";24import {25  requestMeshRelayReconcile,26  selectProductionDialTargets,27  setupMeshRelayListener,28} from "./mesh-relay-listener";29import { hardenExtensionStorage } from "./storage-access";30import { recordInstalledVersion } from "../shared/release-notes";3132chrome.runtime.onInstalled.addListener((details) => { void recordInstalledVersion(details); });3334// The chrome.idle.onStateChanged listener lives in ./alarms (the architectural35// home for auto-lock timing). Keeping it in only one place avoids drift.3637// Lock-on-close via port disconnect. The popup opens a nonce'd port38// ("popup-<uuid>"); when that port disconnects (popup closed), lock if39// lockOnClose is enabled. Previously also declared in the never-bundled40// index.ts (deleted in LV-5) — this is now the single registration.41//42// LV-5: the lock port name carries a per-popup-open random suffix. Another43// extension cannot open ports INTO this extension (onConnectExternal is not44// registered), so the nonce is defense-in-depth — a port named exactly45// "popup" from anything that isn't our popup no longer reliably triggers46// deny-all + lock once the legacy window closes.47const POPUP_PORT_PREFIX = "popup-";4849chrome.runtime.onConnect.addListener((port) => {50  if (!port.name.startsWith(POPUP_PORT_PREFIX)) return;51  const senderUrl = port.sender?.url;52  const extensionOrigin = new URL(chrome.runtime.getURL("")).origin;53  if (port.sender?.tab || !senderUrl || new URL(senderUrl).origin !== extensionOrigin) return;54  port.onDisconnect.addListener(async () => {55    await denyAllPendingPasskeyRequests();56    const s = await ensureSettingsLoaded();57    if (!isUnlocked() || s.lockOnClose !== true) return;58    if (await isRecoveryConfirmPending()) return;59    await lock();60  });61});6263export function start(): void {64  // PB-26-203: establish the storage trust boundary first, then decide65  // whether the session escrow may operate, then restore. The composed66  // promise is handed to the message layer as a gate; the handler itself is67  // still registered synchronously below (MV3 requirement).68  const hardening = hardenExtensionStorage();69  setLockedSyncHooks({70    refresh: refreshLockedSyncSpool,71    afterUnlock: drainAndRefreshLockedSyncSpool,72  });73  // MV3: the chrome.runtime.onMessage listener MUST be registered during the74  // worker's initial SYNCHRONOUS evaluation. If registration is deferred behind75  // an await, a popup/content message that wakes a cold worker is dispatched76  // before the listener exists → "receiving end does not exist", and the popup77  // misreads the failed HAS_VAULT as "no vault" and shows onboarding.78  //79  // So: kick off session-restore, hand its promise to the message layer as a80  // gate, and register the handler synchronously. Unlock-dependent handlers81  // await the gate (see handleMessage), which preserves the SEV-3-B fix — no82  // spurious lock screen — without delaying listener registration.83  const restored = hardening84    .then((h) => applyStorageHardening(h.sessionEscrowAvailable))85    .then(() => restoreFromSession());86  setRestoreReady(restored);87  setupMessageHandler();88  void setupAutoLock();89  setupCommands();90  // HV-2: clipboard auto-clear backstop must survive worker eviction; the91  // listener has to be registered during initial synchronous evaluation so92  // a cold worker woken BY the alarm still handles it.93  setupClipboardClearAlarm();94  void setupPasskeyProxy();95  // Wire the sync production runner into the dispatcher. Without this96  // `triggerSyncIfReachable` is a no-op (the runner slot starts null) — the97  // pairing/transport/coordinator stack ships dormant until this assignment.98  setSyncRunner(productionSyncRunner);99  setSyncDialTargetSelector(selectProductionDialTargets);100  setupMeshRelayListener();101  // 10-minute background sync. Must be registered during initial synchronous102  // evaluation for the same reason as the clipboard alarm: a cold worker103  // woken BY the sync alarm needs the listener already attached. Setup is104  // idempotent — calling it after a SW revival is safe.105  setupSyncAlarm();106  // First dial without waiting for the alarm tick. The runner is wired and107  // the vault is unlocked enough that listPairedDevices works — the in-flight108  // guard inside triggerSyncIfReachable handles the case where another path109  // (e.g. a fresh pairing completing on the same wake) is already running.110  void restored111    .then(() => requestMeshRelayReconcile())112    .then(() => repairPairedRevocationOverlaps())113    .then(() => hydratePersistedSyncState())114    .then(() => triggerSyncIfReachable({ reason: "startup" }))115    .catch(() => undefined);116}117118start();